Symbols in the Applications Menu

NOTICE

Some symbols become visible only if the application is listed in the favorites bar.

Symbols	Name
	Vehicle selection Use this symbol to select a vehicle (Vehicle selection)or to access the Car history.
	Trouble codes Use this symbol to read out and delete trouble codes stored in the trouble code memory of the ECU. You can also retrieve information on the trouble code (Trouble code).
	Automatic diagnostics Use this symbol to call up the function Automatic diagnostics. Here you can start an automatic check of all ECUs installed in the vehicle. The system recognizes the systems independently, reads out the trouble code memories and creates an overview of all registered trouble codes.
	OBD diagnostics Use this symbol to start the standardized OBD2 diagnostics (OBD diagnostics)through emission-relevant components. Here you select merely the vehicle manufacturer and the fuel type.
	Parameters Use this symbol to view the real-time data or conditions of the components from the ECU graphically and alphanumerically (Parameter).
	Actuators Use this symbol to activate or deactivate actuators with the help of the ECU (Actuators).
	Basic setting Use this symbol to reset components to their basic setting (Basic setting).
	Codings Use this symbol to code new components in the ECU (Coding).
	Test function Use this symbol to perform special tests/self-tests (Test function).
	Service reset Use this symbol to reset the service interval. Do the service reset either manually or with the diagnostic device (Service reset).
	Car History Use this symbol to call up the Car history (Car History). You can also synchronize the Car History with the Cloud using this symbol.
	Component location This symbol indicates the component location (Component location).
	Add parameter Use this symbol to add a parameter under >Parameters<.
	Parameter added This symbol indicates that a parameter has been added under >Parameters<.
	Remove parameter Use this symbol to remove selected parameters under >Parameters<.
	Add data selection/symptom Use this symbol to add a data selection/a symptom under >New help call<.
	Delete data selection/symptom Use this symbol to delete a data selection/a symptom under >New help call<.
	Read out the VIN Use this symbol to read out the VIN and to select the vehicle from the vehicle database under Vehicle selection > Vehicle search.
	Status subsystem not available This symbol indicates that the statusof the subsystem is not available under >Trouble codes<.
	Move the viewing position Use the arrows to move the viewing position of the images to the left or right or to the top or bottom.
	Original view Use this symbol to change to the original image view.
	Confirm Perform functions such as the following with this symbol: Start the selected function. Confirm the present entry. Confirm your menu selection.
	Delete Use this symbol to delete vehicle entries under >Car History<, help calls under >New help call< and trouble codes under >Trouble codes<.
	Write message Use this symbol to send a written request or message of any kind (e.g. help call) to the Hella Gutmann support of Hella Gutmann.
	Help call sent This symbol under Vehicle selection > Car History indicates that a help call has been sent.
	Help call still not read This symbol under Vehicle selection >Car History indicates that help calls are present which have not been read yet.
	Help call read This symbol under Vehicle selection > Car History indicates that a help call has been read.
	Additional information Use this symbol to view additional information under >Parameters< or vehicle information under >Vehicle selection<.
	Expert functions in trouble codes Use this symbol to preselect and assign e.g. drivers or trouble codes under >Trouble codes<. The expert mode must be activated and an assembly must be opened in order to use the expert function.
	Start request Use this symbol to start a request under >Trouble codes<.
	Faults in trouble codes This symbol indicates a faulty status under >Trouble codes<.
	Show password
	Hide password
	Vehicle search Use this symbol to search for a vehicle e.g. through VIN, manufacturer key no. or its HGS registration number.
	Settings Use this symbol to configure the device.
	NOTE This symbol indicates that steps/actions are highlighted here to which special attention must be paid when performing work tasks (e.g. recall campaigns).