Register New CSM User

Proceed as follows to register a new CSM user:

  1. Use to select > Settings > Device > User administration.
  2. Log in a local user.
  3. Select >Register new CSM user<.
  4. Enter the CSM user data.
  5. Select >Register<.

  6. NOTICE

    notice

    A verification e-mail will be sent to the specified e-mail address. The verification e-mail contains a token.

  7. Enter the token from the verification e-mail.
  8. Select >Verify e-mail address<.

  9. NOTICE

    notice

    A further verification e-mail will be sent to the specified e-mail address. The verification e-mail contains an IDnow token.

  10. Install the IDnow app on the mobile device by using the link specified in the verification e-mail.
  11. Open the app and start the identification.
  12. Follow the instructions in the app.
  13. Select >Update< if the verification data has been successfully transferred by the app.
  14. The user has been successfully verified.
  1. The registration of a new CSM user is hence finished.