Diagnosis
The manufacturer-specific vehicle communication enables the data exchange to the vehicle systems that shall be checked.
The following parameters are available under Diagnostics:
- >Trouble codes<
- Here you can read out and delete trouble codes stored in the ECU memory. Information on the trouble code are available too.
- >OBD diagnostics<
- Start the OBD2 diagnostics through emission-relevant components here. Here you select merely the vehicle manufacturer and the fuel type.
- >Parameters<
- Here the device indicates the real-time data or conditions of the components from the ECU graphically and alphanumerically.
- >Actuators<
- Here you can activate or deactivate actuators with the help of the ECU.
- >Basic settings<
- Here you can reset components to their basic setting.
- >Codings<
- Here you can code components in the ECU.
- >Test function<
- Here you can perform special tests/self-tests.
- >Service resets<
- Here you can reset the service interval. Do the service reset either manually or with the diagnostic device.