Status and Operating Symbols

The following status and operating symbols inform about the current device status or enable the access to general functions of the mega macs PRO.

Symbols	Designation
	Device users Use this symbol to log in or log out an already existing user. see Managing Users
	VCI connected This symbol indicates that mega macs PRO is connected to the VCI. After the successful VIN identification a blue dot appears at the symbol. You can also use this symbol to perform a VCI test if the connection is established. see Perform VCI Tests
	VCI disconnected This symbol indicates that the connection between mega macs PRO and the VCI is disconnected.
	Warning notices Use this symbol to view warning notices and system messages.
	Menu Use this symbol to call up further functions and settings.
	Search for terms Use this symbol to search for components in different types of data records in the search bar (e.g. wiring diagrams, component location or component test values). A vehicle needs to be selected for the search.
	Connections Use this symbol to check if there is a connection to the Network, to the HG data server and to the Workshop-Net.
	HG data server connected This symbol indicates that mega macs PRO is connected to the HG data server.
	HG data server disconnected This symbol indicates that the connection between mega macs PRO and the HG data server is disconnected.
	Workshop-Net connected This symbol indicates that mega macs PRO is connected to Workshop-Net. see Setting Up and Using the Workshop-Net
	Workshop-Net disconnected This symbol indicates that the connection between mega macs PRO and Workshop-Net is disconnected.
	HG device connection established This symbol indicates that mega macs PRO is connected to the HG device connection. see HGS Connect
	HG device connection disconnected This symbol indicates that the connection between mega macs PRO and the HG device connection is disconnected.
	Car History Use this symbol to call up the Car history. see Car History
	Print Use this symbol to call up print options and to print out the current window. see Printout Functions
	Version Use this symbol to view information about the current version.
	Settings Use this symbol to configure the device.
	macs365 Use this symbol to view information about the current macs365 license.
	Close Use this symbol to close e.g. a function or a menu window.
	Close info and instructions window Use this symbol to close an info and instructions window.
	Calendar Use this symbol to open the calendar.
	Open drop-down list Use this symbol to open a drop-down list.
	Loading image This symbol indicates that an image is being loaded.
	Zoom in Zoom in the present view with this symbol.
	Zoom out Zoom out of the present view with this symbol.
	Help Use this symbol to call up additional information within a function.
	Add parameter Use this symbol to add a parameter under >Parameters<.
	Parameter added This symbol indicates that a parameter has been added under >Parameters<.
	Remove parameter Use this symbol to remove selected parameters under >Parameters<.
	Add data selection/symptom Use this symbol to add a data selection/a symptom under >New help call<.
	Delete data selection/symptom Use this symbol to delete a data selection/a symptom under >New help call<.
	Read out the VIN Use this symbol to read out the VIN and to select the vehicle from the vehicle database under Vehicle selection > Vehicle search.
	Status subsystem not available This symbol indicates that the statusof the subsystem is not available under >Trouble codes<.
	Move the viewing position Use the arrows to move the viewing position of the images to the left or right or to the top or bottom.
	Original view Use this symbol to change to the original image view.
	Confirm Perform functions such as the following with this symbol: Start the selected function. Confirm the present entry. Confirm your menu selection.
	Delete Use this symbol to delete vehicle entries under >Car History<, help calls under >New help call< and trouble codes under >Trouble codes<.
	Additional information Use this symbol to view additional information under >Parameters< or vehicle information under >Vehicle selection<.
	Expert functions in trouble codes Use this symbol to preselect and assign e.g. drivers or trouble codes under >Trouble codes<. The expert mode must be activated and an assembly must be opened in order to use the expert function.
	Start request Use this symbol to start a request under >Trouble codes<.
	Faults in trouble codes This symbol indicates a faulty status under >Trouble codes<.
	Show password
	Hide password